Downloads
FM 10S/FMi 703 Smartcore Board Software Version 1.0.52
Available only to registered users....click here to login or register.
Revised: 6/27/07
Version 1.0.52 incorporates multiple new features from version 1.0.49. Including a)implement soft start functionality to avoid potential overdrive conditions that may result in premature PA module failure in IBOC Only and FM & IBOC modes of operation, b)separate bias setting for the IBOC only mode and the FM+IBOC modes for both the PAs and the IPAs is implemented, c)ability to calibrate forward power LCD meter in FM Only, FM+IBOC, or IBOC Only modes. Note:The Serial Interface Board Programmer will be required to upload this software to the transmitter. This Programmer may be purchased or borrowed from BE. Detailed upgrade instructions are included. IMPORTANT NOTE: Version 1.0.52 of FM 10S / FMi 703 Smartcore Board software requires version 1.09 of U7 and U107 Module Control Board firmware and version 2.0 of U41 FXi 250 Exciter firmware for the FXi 250 Exciter when installed in an FMi 703 transmitter. It is necessary that this software and firmware be upgraded simultaneously. Please reference the FM 10S, FMI 703, FXi 250 Software Release Technical Bulletin for further details and ordering information.
FM 10S/20S and FMi 703/1405 Module Control Board Firmware Version 1.07
Available only to registered users....click here to login or register.
Revised: 5/07/07
Version 1.09 for U7 and U107 of the "S" series transmitter module control board. Compatible with FM 10S / FMi 703 software version 1.0.50 or greater and FM 20S / FMi 1405 software version 2.1.20 or greater. Note: an RS 232 Driver Interface Kit (part number 979-0515-107) is required for field programming.
|
 |
|
